Welding Stick Electrode

Product Details:

• Basic type coating
• High Carbon and Cr content in the weld metal
• Non machinable deposit
• Exhibit good corrosion resistance
• High volume fraction of primary carbides offer excellent wear resistance up to 1000°C
• Apply one or two layer to avoid cracking

• Coke chutes, Screws
• Cultivator shovels, Plough shares,
• Mining, Agriculture, Earth moving and Sand blasting equipments
• Edge runner scrappers
• Conveyors, Grinding rings
• Cement clinker crushing rollers
• In Ceramic industries

Product Details:

• Basic type coating
• Non machinable alloyed cast iron deposit
• Deposit surface does not deteriorate through furrowing, local plastic flow and micro cracking
• Weld deposit can withstand severe abrasion, moderate impact and metal to metal wear
• Resistant to scratching and grinding abrasion

• Concrete Mixer Blades
• Muller Tyres, Dippers
• Screw Conveyors
• Plough Shares
• Cement Die Rings
• Oil Expeller Worms
• Scraper Blades
• Excavator Teeth

Product Details:

• Basic type electrode
• Optimum resistance against metal to metal wear, abrasion and impact
• Air hardenable
• Non machinable weld
• Preheating is required when used on hardenable steels

• Blanking and Forming dies
• Cutting tools
• Mining tools
• Shear blades
• Hog & Chipper knives
• Wood working tools
• Rolling mill guides
• Ingot fitting tongs

Product Details:

• Basic type coating
• Air hardenable non machinable weld
• Recommended buffer layer of
• Tenalloy-16 on hard base materials
• Resistance against high stress abrasion and friction
• Can withstand moderate impact
• Resistant to spalling and cracking

• Crushers and hammers
• Excavator teeth
• Shear blades
• Metal to mineral wear application
• Crane wheels, Caterpillar treads
• Bulldozer blades, Bucket lip
• Bamboo chipper knives
• Dis-integrator hammers

Product Details:

• Rutile coated electrode
• Air hardenable deposit
• Non machinable
• Resistant to spalling and cracking
• Resistance against high stress abrasion and friction
• Can withstand moderate impact
• Recommended buffer layer of
• Tenalloy-16 on hard base materials

• Dis-integrator hammers
• Excavator teeth, Shear blades
• Bulldozer blades, Bucket lip
• Metal cutting and forming tools
• Crane wheels, Caterpillar treads
• Cane cutting knives

Product Details:

• Rutile type heavy coating
• Air hardenable crack free deposit
• Non machinable
• Resistant to metal to metal wear
• Resistance against high stress abrasion and impact
• Impact resistance increases after tempering

• Shear blades
• Tamping tools
• Crane wheel
• Ingot tongs
• Forming dies
• Cutting tools
• Pug mill screws
• Pulverizer hammers

Product Details:

• Basic coated electrode
• Air hardenable deposit
• Machinable with carbide tools
• Resistant to friction
• Good combination of abrasion and toughness
• Recommended buffer layer of
• Tenalloy-16 on hard base materials

• Conveyor parts
• Supporting rollers of Kiln tyres
• Brake shoes, Gear shafts
• Wobbler ends
• Excavators, Plough shares
• Cold punching dies
• Shear blades
• Cog wheels

Product Details:

• Rutile coated electrode
• Air hardenable deposit
• Machinable with carbide tools
• High weld metal recovery
• Good combination of abrasion and impact properties
• Resistant to friction
• Recommended buffer layer of
• Tenalloy-16 on hard base materials

• Excavators, Conveyor parts
• Supporting rollers of Kiln tyres
• Wobbler ends, Cams
• Gear shafts
• Plough shares
• Shear blades
• Girth gears in cement and power plants

Product Details:

• Rutile coated electrode
• Weld deposit resistant to moderate and impact
• Air hardenable machinable deposit
• Good resistance against rolling and sliding friction
• Recommended buffer layer of
• Tenalloy-16 on hard base materials

• Gears, Pinion teeth
• Track links, Tram tyres
• Sugarcane crushers
• Gear wheels, Hammers
• Wobblers, Chassis
• Rollers, Sprockets
• Pulleys, Shafts
• Couplings, Spindles
• Excavators, Axles
• Rail points and crossings

Product Details:

• Graphite based coating
• High Ni alloyed electrode
• Minimum base metal dilution and penetration
• Electrode welds cast iron the cold way
• Soft, ductile and machinable weld with adequate strength
• No need of preheating even for large complicated castings
• Easy and intimated fusion with all grades of cast iron

• Repair of broken heavy castings, machine bases, motor blocks, sprockets, valve bodies, impellers, pump casting and gears
• Joining and build up of grey cast iron and malleable iron
• Joining cast iron to steel
• Correcting machining errors on castings
• Suitable for thin walled grey cast iron
• Sliding tables for machine tools
• Building up on cast iron parts exposed to corrosive liquids

Product Details:

• Graphite based coating
• Monel type weld deposit
• Machinable weld
• Minimum dilution ensures shallow but sufficient depth of fusion
• No need of preheating

• Repair of cast iron castings
• Well suited for Gears, machinery parts, Pump bodies
• Rebuilding worn surfaces
• Joining cast iron to steel
• Correcting machining errors on castings

Product Details:

• Basic type non-synthetic coating
• Super duplex SS deposit
• High strength and freedom from weld cracking in highly restrained joints
• Presence of Tungsten ensures highest resistance to hot cracking
• Improved resistance against pitting, chemical attack and chloride environment e.g. sea water
• Low spatter losses
• Easy slag detachability
• Radiographic quality weld

• Welding of super duplex stainless steels such as UNS S32550, S32750, S32760 (wrought) and UNS J93370, J93380, J93404, CD4MCuN (cast) Can be used to weld standard duplex stainless steel such as UNS S31803 and UNS S32205, carbon and low alloy steels to duplex steels as well

Product Details:

• Rutile type non-synthetic coating
• Super duplex SS weld deposit
• Resistant to pitting, chemical attack and chloride containing media
• Tungsten provides resistance against hot cracking
• Ni and N ensures good toughness properties and freedom from weld cracking in highly restrained joints
• Easy slag detachability
• Suitable for all position
• Radiographic quality weld

• Welding of super duplex stainless steels such as UNS S32550, S32750, S32760 (wrought) and UNS J93370, J93380, J93404, CD4MCuN (cast)
• Can be used to weld standard duplex stainless steel such as UNS S31803 and UNS S32205, carbon and low alloy steels to duplex steels as well

Product Details:

• Basic coated non-synthetic electrode
• Austenitic-ferritic duplex micro structure
• Excellent high strength combined with improved resistance to pitting and SSC in chloride environment
• Super duplex SS weld with N addition
• Weld metal characteristics similar to super duplex wrought and cast alloys
• Easy slag removal
• Uniform and fine ripples
• Radiographic quality weld

• Welding of super duplex stainless steels UNS S 32750, S 32760, SFA 2507, Zeron 100 and Casting alloys e.g. ASTM A890 Gr.5A
• Suitable for materials 1.4410, 1.4460, 1.4462, 1.4463
• Pipe work systems, flow lines, risers, manifolds, process equipment for use in offshore oil and gas industries, chemical and petrochemical plant
• Also to be used on duplex 2205 grade

Product Details:

• Rutile type non-synthetic coating
• Austenitic-ferritic type weld deposit
• Excellent combination of high strength and resistance to chloride induced SCC and pitting
• Can be applied for operating temperature upto 200oC
• Suitable for all position
• Uniform and fine ripples
• Radiographic quality weld

• Welding of 2205, 2209 type duplex stainless steels and similar composition
• Pipelines transporting chloride bearing products and sour gases
• Cladding on carbon and low alloy steels
• Cast pumps, Valve bodies and sea water handling equipment
• For chemical equipments, heat exchangers, off-shore platforms
• Suitable for materials 1.4417, 1.4460, 1.4462, 1.4362, 1.4162

Product Details:

• Basic coated electrode
• Typical 17Cr ferritic alloy
• Proper preheating and PWHT will achieve desired properties
• Air hardenable weld deposit
• Excellent arc stability and low spatter
• All position welding capability
• Radiographic quality weld

• For welding ferritic martensitic chrome steels and steel castings of similar composition
• For general corrosion and heat resisting applications
• Cladding of exhaust valves
• Joining and cladding of 17Cr alloy
• For cladding where temperature and corrosion resistance is necessary
• For cutlery, pump parts, castings, oil refinery equipments
• Suitable for material 1.4057, 1.4740, 1.4742, 1.4059 and AISI 430 steel

Product Details:

• Basic type non-synthetic electrode
• Medium-heavy coated
• High strength combined with excellent toughness and cracking resistance
• Preheat and PWHT recommended
• Martensitic type alloy resistant to corrosion, erosion, pitting and impact
• Smooth arc characteristics
• Easy slag removal
• All position welding capability
• Radiographic quality weld

• Welding of ASTM CA 6NM casting or similar materials as well as light gauge 410, 410S and 405 base metals
• Welding of extra low carbon castings and forgings of similar composition and surfacing applications
• Surfacing of turbine blades, high pressure valves
• Repair of runners, valve seats, pulp and paper plant equipment
• German castings/forgings type G-X5CrNi13.4 and G-5CrNi13.6, VIRGO 104 casting/forging

Product Details:

• Rutile based semi basic coating
• Low carbon 20/25/5/Cu type fully austenitic deposit
• Recommended for highly corrosive conditions in the chemical industries, sea water desalinization plants
• Resistant to pitting and crevice corrosion in chloride bearing media
• Radiographic quality weld deposit
• Resist intergranular corrosion and sulfide stress corrosion cracking
• Scaling resistance upto 1200°C and operating temperatures upto 400°C
• Smooth arc and medium penetration
• Least spatter and easy slag removal
• Finely rippled smooth bead

• Welding of 904L, HV-9A, HV-9 stainless steel and similar alloys for high temperature and/or high corrosion service
• Welding of 904L steel to other grades of stainless steel
• Welding of austenitic stainless steels with enhanced corrosion resistance to reducing media
• Suitable for materials 1.4539, 1.4439, 1.4537,1.4505, 1.4506, 1.4531, 1.4536, 1.4573, 1.4585, 1.4586

Product Details:

• Acid-Rutile based coating
• 25/20 SS type deposit
• Provides excellent stability and high temperature oxidation resistance upto 1150°C
• Excellent resistance to cracking and fissuring
• Stable arc and low spatter loss
• Easy slag removal
• Radiographic quality weld

• Joining difficult to weld steels such as armor plates and ferritic stainless steels as well as dissimilar steels
• Furnace parts, Annealing boxes and carburizing pots, Gas turbine combustion chamber parts, hydrogenation and polymerization plant
• Welding of AISI 310 and similar grades
• Cladding side of stainless steels and dissimilar steels
• Suitable for materials 1.4710, 1.4713, 1.4745, 1.4762, 1.4823, 1.4832, 1.4837, 1.4840, 1.4841, 1.4845, 1.4846, 1.4848, 1.4849

Product Details:

• Acid-Rutile based coating
• Deposit is 23/12/2.5Mo type
• High ferrite content ensures maximum cracking resistance
• Easy slag removal
• Mo addition provides high strength and corrosion resistance
• Excellent corrosion and oxidation resistance upto 1100°C
• Radiographic quality weld deposit

• Welding of AISI 309 Mo type steels
• Dissimilar joints between 316 type and low alloy or carbon steels
• Buffer layer on low alloy and carbon steels before deposition of 316 type weld metal

Product Details:

• Rutile coated electrode
• High ferrite content ensures maximum cracking resistance
• Mo addition provides high strength and corrosion resistance
• Deposit is 23/12/2.5Mo type
• Excellent corrosion and oxidation resistance upto 1100°C
• Suitable for all position
• Radiographic quality welds

• Welding of AISI 309 Mo type steels
• Dissimilar joints between 316 type and low alloy or carbon steels
• Buffer layer on low alloy and carbon steels before deposition of 316 type weld metal

Product Details:

• Acid-Rutile based coating
• 23/12/Nb stabilized SS deposit
• Resistant to cracking
• Low dilution on mild and low alloy steels due to higher alloy content
• Resist intergranular corrosion
• Superior strength and oxidation resistance upto 1100°C
• Easy slag removal
• Radiographic quality weld deposit

• Welding of AISI 309, 309 Nb type steels
• Dissimilar joints between 347 type and low alloy or carbon steels
• Buffer layer on low alloy and carbon steels before deposition of 18/8 type stabilized weld metal
• Joining corrosion resistant clad steels

Product Details:

• Basic type electrode
• Special alloying to improve impact resistance and red hardness
• Crack free weld in heavy build up
• Resistant to severe abrasion and corrosion at elevated temperature
• No drop in hardness even at 500°C due to secondary hardening

• Blast furnace Bells & Hoppers
• Steel mill equipments
• Tong pins, Hot shears
• Metallurgical plants

Product Details:

• Basic type work hardenable electrode
• High hardness under severe impact conditions
• Machinable and crack free deposit
• Typical 20% Cr deposit
• Semi austenitic alloy
• Exhibit good combination of impact, abrasion and corrosion resistance

• Screw flight
• Sand pump impellers
• Conveyor rolls, Truck chains
• Pulveriser plows, Pump housing
• Coal mining cutters
• Scarifier teeth, Rock crusher
• Ideal for buffer layer before hardfacing

Product Details:

• Basic coated electrode
• Machinable and crack free deposit
• Work hardening characteristics
• Typical 16% Cr deposit
• Specially formulated for resistance against impact, abrasion and corrosion

• Dipper teeth and lips
• Coal mining cutters, Rock crusher
• Pulveriser plows, Pump housing
• Conveyor rolls
• Austenitic Mn steel rails and castings
• Dredger cutter teeth, Buckets
• Ideal for buffer layer before hardfacing on mild, carbon, low alloy and austenitic Mn steels

Product Details:

• Basic type heavy coated electrode
• Modified austenitic Mn steel deposit
• Good machinability
• Crack free and sound weld
• Work hardening characteristics
• Very high resistance to deformation
• Typical 16% Mn deposit
• For superior impact and moderate abrasion resistant overlays
• Recommended buffer layer of
• Betachrome-N/ND on mild and low alloy steels

• Bucket teeth, wobblers
• Crusher rollers and jaws
• Pulveriser hammers and beaters
• Austenittic Mn steel rails and casting
• Chain links,Sprockets
• Crusher hammers and mantles
• Suitable for buildup and cushioning on Mn steels and alloy steels

Product Details:

• Basic type coating
• Easily machinable
• Crack free and sound weld
• Recommended buffer layer of
• Betachrome-N on mild and low alloy steels
• Typical 12% Mn deposit
• Exhibit excellent work hardening characteristics under severe impact conditions
• Ideal for gouging type abrasion wear

• Rock crushing jaws
• Cement grinding rings
• Mn steel rails
• Suitable for build-up and cushioning
• Dredger bucket teeth
• Austenitic Mn steel castings
• Hammers
• Crusher mantles

Product Details:

• Basic coated electrode
• 20/33/2/CuNb stabilized fully austenitic weld
• High strength and excellent oxidation resistance upto 1200°C
• Resistance to corrosion in sulphuric acid, mineral and organic acids
• Smooth and uniform weld beads
• Low spatter loss
• Radiographic quality weld

• Welding AISI 310 type, HV-9A stainless steel, Carpenter 20Cb-3, Alloy 20
• Repairing of castings of similar composition
• For chemical industries handling sulphuric acids and their salts