Welding Electrodes

Product Details:

• Heavy coated iron powder type
• Extremely high metallurgical purity
• C-1.2Mn-1Ni type weld deposit
• High impact at subzero temperatures

• A537 class 1 (modified)
• Si-Mn steel containing up to 1%
• Ni 15Mn Ni63 structural steel
• For heavy joints under restraint and subjected to dynamic loading
• Low temperature applications S
• Tructural steels, Boiler plates & Pipe steels
• Welding of fine grained structural steels with minimum yield strength of 420 MPA  

Product Details:

• Low hydrogen lime coated
• Highly ductile welds provide resistance to cracks
• Excellent impact properties at subzero temperatures

• Highly suitable for difficult to weld steels e.g. High carbon, Alloy, High sulphur, Free machining, Cast, Cold rolled steels and Armor plates
• As a buffer layer before hardfacing
• High carbon steel to mild
• Steel Steels of unknown composition
• Suitable for ASTM SA 414/414M Gr.C/D/E

Product Details:

• Basic type iron powder electrode
• Deposition efficiency approx 110%
• Exhibit excellent impact at sub zero temperatures
• All position capability

• Ammonia storage tanks
• Horton spheres, Pressure vessels
• Si-Mn steels Steels containing Ni up to 1%
• For mild steel and heavy joints at sub-zero temperatures
• Joining ASTM SA 515/515M Gr.60/65, SA 516/516M Gr.60/65 steels

Product Details:

Product Details:

• Basic coated iron powder type
• Suitable for pipe welding in 5G, 6G & 6GR positions
• Excellent toughness down to -45ºC
• Radiographic weld deposit All position capability

• Storage tanks, pipes, boilers
• Bridges & heavy structures subject to dynamic loading
• Joining ASTM SA 414/414M Gr.C/D, SA 516/516M Gr.55/60, IS 2002, IS 2062 steels

Product Details:

• Extra low hydrogen iron powder type
• Weld metal resistant to cold and hot cracking and tri-axial stressing
• Medium Penetration
• Excellent toughness down to -46°C All position capability

• Carbon and low alloy steel fabrication where severe service condition exist
• Suitable for medium high tensile steels, heavy sections and restrained joints in high tensile steel
• Joining steels of ASTM 106 Gr.B (NACE quality), SA 414/414M Gr.D/E/F/G, SA 515/515M Gr.60/65, SA 516/516M Gr.60/65

Product Details:

• Basic coated low hydrogen electrode
• Ductile weld metal provide superior crack resistance
• All position capability
• Excellent impact properties down to -30°C
• Radiographic weld deposit

• Buffer layer before hardfacing
• Joining cast iron to mild steel
• Repair of cast iron
• Butt welding of rail ends
• Fixing of rails to mild steel girders

Product Details:

• Medium coated basic electrode
• Moisture resistant coating
• Weld metal resistant to cold and hot cracking and tri-axial stressing
• Positional welding characteristics with medium coating ideal for full penetration root run in pipe welding
• DCEN preferred for root run welding of pipes

• One side welding of pipes
• Horton spheres, Penstocks
• Carbon steel and low alloy steel pressure vessels fabrications and where severe service conditions exist
• For NACE quality carbon steel pipes
• Off-shore process platform structures
• Medium, high tensile structural steels
• Heavy sections and restrained joints in high tensile structural steels

Product Details:

• Sheet metal work
• Storage tanks
• Vehicles, Railway wagons
• Shipbuilding, Pipes
• Steel furniture
• General structural application
• Welding IS 2062

• Superior welding characteristics
• All position electrode
• Operates at low OCV
• UTS of 430-540 MPa

Product Details:

• Basic coated iron powder type
• Excellent toughness down to -60ºC
• Radiographic weld deposit
• Suitable for pipe welding in 5G and 6G positions

• Storage tanks, pipes, boilers
• Bridges & heavy structures subject to dynamic loading
• Joining ASTM SA 414/414M Gr.C/D, SA 516/516M Gr.55/60/65/70, IS 2002, IS 2062 steels